x 
Recently added item(s)
Total:

33xx Pro Bridge - No Route

Stock replacement parts and options listed on these pages below will fit the 3300 and 3310 Professional fixed bridges only. FYI: The 33xx models may, or may not be stamped "Professional" depending on when it was made. This model is not a tremolo and does not require body routing. The "angle cut" mounting plate (shown above) mounts with 4 Phillips wood screws.

Results 1 - 22 of 22

This is the front mounting screw for the Kahler tremolo and fixed bridge systems.

$2.00

This is the Kahler mounting screw for bass tremolos that also doubles as the rear mounting screw for the guitar...

$2.00

This is the Kahler fixed bridge string hook for all fixed guitar bridges with fine tuners.

$7.00

This is the Kahler fine tuner lever for all fixed guitar bridges.

$7.00

This flat top fine tuner knob with a 6/32 thread is for the Kahler Flyer tremolo system or the Kahler 2500 and 2520...

$7.00
Options:

This is the brass roller saddle for all Kahler CAM guitar tremolos and fixed bridges.

$19.00
Options:

This is the steel roller saddle for all Kahler CAM guitar tremolos and fixed bridges.

$24.00
Options:

This is the teflon roller that can be used for all Kahler CAM guitar tremolos and fixed bridges.

$6.00

This is the brass roller that can be used for all Kahler CAM guitar tremolos and fixed bridges.

$6.00

This is the teflon roller that can be used for all Kahler CAM guitar tremolos and fixed bridges.

$6.00

This is the steel roller that can be used for all Kahler CAM guitar tremolos and fixed bridges.

$6.00

This is the Kahler saddle riser or lock screw for the guitar CAM, FLYER and fixed bridge guitar systems.

$0.50

The Kahler clamp plate screw is for CAM based guitar tremolo saddles.

$1.00

You want this Kahler flat top saddle clamp screw and a shorter saddle riser #8320 for each saddle you want to lower.

$1.00

This is the Kahler saddle riser screw.

$1.00

This universal set contains all the Allen keys that are used for all the Kahler models.

$7.00

This is the Kahler bottom cover plate that covers all the string hooks.

$6.00

This is the Kahler bottom cover plate screw.

$1.00

The Kahler Flyer or Fixed Bridge stacker plate is made from 1/16" (1.5mm) steel and is powder coated black

$19.00

The Kahler non-recessed adapter plate is made from 1/16" (1.5mm) steel, powder coated black.

$19.00

The Kahler recessed adapter plate is made from 1/16" (1.5mm) steel.

$24.00

Kahler guitar tremolo systems that are flat mounting use four screws to mount to the body. This is a complete set of 4.

$6.00