x 
Recently added item(s)
Total:

23xx Pro Tremolo - CAM

Stock replacement parts and options listed on these pages below will fit the 2300, 2310, 2315, 2317, 2318, 2320, 2327, 2328 Professional tremolos only. FYI: Patent number or not, if the mounting plate (shown at upper left of plate group) has a Kahler logo on the back or side shoulder, has a curved or straight back and mounts with 4 Phillips wood screws, its a 23xx model.

 

Results 1 - 30 of 44

This is the front mounting screw for the Kahler tremolo and fixed bridge systems.

$2.00

This is the Kahler mounting screw for bass tremolos that also doubles as the rear mounting screw for the guitar...

$2.00

Standard arms are the arms for all Kahler CAM system guitar tremolos.

$29.00
Options:

The Kahler Heavy Metal arm (HM arm) is based after the Floyd Rose arm.

$29.00
Options:

You can use both the Kahler standard or wide tremolo string hooks on any past or current CAM system including the...

$9.00

This Kahler longer CAM locking screw locks the CAM to the frame and turns the flat mounted Kahler into a fixed bridge.

$4.00

The Cam Ball Bearing is pressed into the side of the CAM.

$7.00

This is the bearing bolt for all Kahler CAM tremolo systems.

$3.00

This is the Kahler arm tension adjustment screw for the arm clutch.

$2.00

The Kahler FLYER intonation and CAM stop bolt is a dual purpose screw.

$3.00

This is the 2 spring load lever that was used on a small lot of the single piece cam/cam cage assemblies found on the...

$7.00

This is a two Kahler spring load lever. It holds a pair of either the 8412 or the 8413 springs in any match up to...

$6.00

It is the pivoting pin for the load lever that adjusts the springs.

$1.00

You use the load lever screw to adjust the Kahler tremolos spring tension.

$1.00

This is a locking clip for all Kahler CAM guitar and bass tremolo systems.

$12.00

These standard tension return springs are the correct tension springs for all Kahler 6 string guitar systems. Will also...

$6.00

These heavy tension return springs are the correct tension springs for all Kahler bass tremolo systems. These can also...

$6.00

This is a tension return spring mounting screw.

$1.00

This is the Kahler CAM cage that contains the 6 "top loading" string hooks that the ball end of the string...

$59.00
Options:

This is the pivot pin for the 6 string tremolo hooks that are installed into the CAM cage.

$6.00

You can use both the Kahler standard slot string hook or the wide slot string hooks that suit your needs.

$7.00

This is the 6/32 Kahler fine tuner with the dome top for guitar CAM systems.

$7.00
Options:

This is a Kahler CAM cage mounting screw.

$2.00

This is the brass roller saddle for all Kahler CAM guitar tremolos and fixed bridges.

$19.00
Options:

This is the steel roller saddle for all Kahler CAM guitar tremolos and fixed bridges.

$24.00
Options:

This Kahler saddle mounting pin holds 6 guitar tremolo saddles or up to 5 bass saddles on a narrow (N5) bass tremolo...

$7.00

This is the teflon roller that can be used for all Kahler CAM guitar tremolos and fixed bridges.

$6.00

This is the large teflon roller that can be used for all Kahler CAM guitar tremolos and fixed bridges.

$6.00

This is the brass roller that can be used for all Kahler CAM guitar tremolos and fixed bridges.

$6.00

This is the teflon roller that can be used for all Kahler CAM guitar tremolos and fixed bridges.

$6.00